Hayward OmniLogic Troubleshooting Manual page 41

2. Wi-Fi Connection: "MSP Not Found" (cont.)
Unless changed by the homeowner or network installer, the SSID (network name) and
the default password are often published on the router.
Verify 24VDC on MPP
Step 2G
Unplug MSP and check between the 24VDC and GND
solder points for 24VDC. IF voltage is correct, replace
the HLWLAN. IF no/low voltage, proceed to
(pg. 48) to diagnose system power.
41
Step 2H
Verify the network name & password are both correct.
NOTE: passwords ARE case sensitive, should not include
Section 3 the '&' symbol, AND no spaces. IF correct go to step 2I,
otherwise correct through the network router.
Network name & password