Hayward OmniLogic Troubleshooting Manual page 14

How To: Connect Directly Via Ethernet (cont.)
Step 5 Step 6
Plug Ethernet cable into the MSP (located on Once connections have been confirmed:
the left side of the display), in the designated Proceed to "How To: Create a Web Account"
Ethernet port and verify LEDs illuminate. followed by "How To: Register an OmniLogic".
*NOTE: Both CAT5e and CAT6 type cables can be run at a maximum distance
of 328ft. to maintain 1Gbps of data transfer; however CAT6 has more
shielding which makes it less susceptible to data losses over distance.
14