Hayward OmniLogic Troubleshooting Manual page 38

2. Wi-Fi Connection: "MSP Not Found"
If the OmniLogic system has not been configured, web registration will not be
successful. If not configured, load a backed-up file or complete the configuration
process before continuing.
Verify the Firmware is up-to-date Verify MSP is Configured
Step 2A
Step 2B
Locate the 'config' icon & go to system info. Verify the When configured, system dashboard will appear. When
MSP rev. matches the latest found at not configured or it has been removed, the
www.hayward.com Support Center> Automation > configuration icon will default in the center of the
OmniLogic > Firmware Updates (under MSP). IF not, screen (as shown above). IF configured, go to step 1C. IF
follow steps on pg. 10-12. IF correct, go to step 1B. not, complete the configuration process & retest.
38