Do you have a question about the Super Pump VS 700 and is the answer not in the manual?
Questions and answers
Albert lombardos
April 9, 2025
iam working on a super pump vs 700 currently has zero function when plugged in has display but just reads random code across screen backlight works and I have no change when pressing button or arrows to change speed setting currently dips are set on the rest are up also pump turns on 3min after braker is turned on but now function within the pumps control panel all I see is the display reading random numbers and letters with backlight still alumitnted...do I need to Replace control panel or is there a problem with my dips settings????
thank you
1 comments:
Mr. Anderson
April 10, 2025
The Hayward Super Pump VS 700 may display random codes and not respond to button presses if "Remote Stop" is engaged. This mode disables local control, preventing normal operation and button response.
Page 21
Hayward Variable Speed Pump Thursday 1:27p 1725rpm 380 Watts Timer 1 timer will end at 11:45p...
Page 22
Configuration Menu Locked Configuration Menu press > to enter Use + / - to adjust, > go to next item Time: Th 1:27PM + change > skip Set Day and Time Thursday 1:27p Speed Selection MAX allowed speed 3450 (600-3450rpm) MIN allowed speed 600 (600-3450rpm) Prime Duration...
Page 23
Reset all parameters + for yes; > to skip Are you sure? + for yes; - for no Use Timers Menu to set timeclocks. Timer Menu Press > to enter Timer 1 1725rpm 12:00a to 11:45p Press + to change; Press >...
Page 24
Speeds Menu Press > to enter Speed 1 Name Speed 1 Speed 1 Duration 0:30 hours Speed 1 Speed 1725 (600-3450rpm) Diagnostic Menu Press > to enter Display Revision 1.03 Drive Serial Number DET-3581200032 Comm Rev: 2.15 Drv Rev: 2.00.oz DC Bus Voltage Within Range Motor Current...
Page 25
Power Usage 225W (1700W Max) Drive Temperature 67ºC (110ºC Max) Event log Press + to view Pump is stopped; press STOP/RESUME again to resume normal operation. Quick Clean Quick Clean running Quick Clean 3450 rpm for 60 min; Quick Clean press resume to end.
Need help?
Do you have a question about the Super Pump VS 700 and is the answer not in the manual?
Questions and answers
iam working on a super pump vs 700 currently has zero function when plugged in has display but just reads random code across screen backlight works and I have no change when pressing button or arrows to change speed setting currently dips are set on the rest are up also pump turns on 3min after braker is turned on but now function within the pumps control panel all I see is the display reading random numbers and letters with backlight still alumitnted...do I need to Replace control panel or is there a problem with my dips settings???? thank you
The Hayward Super Pump VS 700 may display random codes and not respond to button presses if "Remote Stop" is engaged. This mode disables local control, preventing normal operation and button response.
This answer is automatically generated
Looking for the wiring diagram for the capacitors