Hayward OmniLogic Troubleshooting Manual page 44

2. Wi-Fi Connection: "MSP Not Found" (cont.)
Some routers may have a power button and others have a reset button. Unplugging
the power cable at the router will ensure it is not reset to factory default.
Attempt registration Power cycle the router
Step 2M
Step 2N
Go to www.haywardomnilogic.com, log in to the Unplug the power to the router. Once completely
account & reattempt registration. IF registration is down, plug the power back in an wait 5 minutes, then
successful, then the problem is solved. IF unsuccessful, rescan. IF IP addresses appear, back-up to step 2M. IF
jump to step 2P. NO IP addresses, go to step 2O.
44