Entering Setpoints - GE Multilin MM3 Motor Manager 3 Instruction Manual

CHAPTER 4: SOFTWARE
4.3.4 Entering
Setpoints
MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
Select the File > Send Info To Relay menu item.
EnerVista MM3 Setup will prompt to confirm or cancel the setpoint
file load.
Click Yes to download the setpoints to the MM3 Motor Manager 3
or No to cancel.
The following example illustrates how to enter setpoints from EnerVista MM3 Setup.
Select the Setpoint > Protection > Motor Protection menu item.
The following window prompts the user for motor protection
information.
Figure 4-11: Motor Protection Setpoints
For numerical setpoints (in the example above, Full Load Current,
Hot/Cold Curve Ratio, and Overload Pickup Level), click the arrow
keys at the end of the dialog box to increment/decrement the
setpoint by its step value.
Alternatively, click the mouse pointer anywhere inside the setpoint
box to display a numerical keypad showing the old value, range,
and increment of the setpoint value being modified.
Figure 4-10: Open File Window
USING ENERVISTA MM3 SETUP
4–11