Working With Setpoints And Setpoint Files; Engaging A Device; Entering Setpoints - GE Multilin 489 Instruction Manual

CHAPTER 4: INTERFACES
4.4

Working with Setpoints and Setpoint Files

4.4.1

Engaging a Device

4.4.2

Entering Setpoints

489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
The EnerVista 489 Setup software may be used in on-line mode (relay connected) to
directly communicate with a 489 relay. Communicating relays are organized and grouped
by communication interfaces and into sites. Sites may contain any number of relays
selected from the SR or UR product series.
The System Setup page will be used as an example to illustrate the entering of setpoints. In
this example, we will be changing the current sensing setpoints.
Establish communications with the relay.
Select the Setpoint > System Setup menu item.
This can be selected from the device setpoint tree or the main window
menu bar.
Select the Current Sensing menu item.
Select the
parameter box.
This will display three arrows: two to increment/decrement the value
and another to launch the numerical calculator.
setpoint by clicking anywhere in the
PHASE CT PRIMARY
4–21