Order Codes; Accessories - GE Multilin MM3 Motor Manager 3 Instruction Manual

CHAPTER 1: INTRODUCTION
1.1.3

Order codes

NOTE
1.1.4

Accessories

MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
The order codes for the MM3 Motor Manager 3 are shown below.
MM3 –
Motor
Manag
er 3
Base unit MM3
Motor
Manag
er 3
MM3 Motor
Manager 3
options
Relay
Display
Power
This instruction manual describes the features of a MM3 Motor Manager 3 with all options
included.
Examples:
• MM3 Motor Manager 3–2–E–N–120: full-featured MM3 Motor Manager 3, ESD
relay, chassis mount unit with 120 V AC control power
• MM3 Motor Manager 3–1–A–W–240: basic MM3 Motor Manager 3 with auxiliary 2
relay, local display and 240 V AC control power
The following accessories are available for the MM3 Motor Manager 3:
• EnerVista MM3 Setup software: no-charge software package to aid in setting up
MM3 Motor Manager 3 operating parameters (available online at
www.GEmultilin.com)
• RS-232/485: RS232 to RS485 converter box designed for harsh industrial
environments
• 5A Phase CT: 300, 350, 400, 500, 600, 750, 1000
• 50:0.025 ground CT: For sensitive ground detection on high resistance grounded
systems
• Control key cover: Covers the auto/manual LEDs, keys and keypad start buttons
Table 1–2: Selection guide
– – –
| | | | Product family
1 | | | Option 1: basic unit
2 | | | Option 2: full unit
E | | ESD relay
A | | Auxiliary 2 relay
N | No display (chassis unit)
W | With local display
120 120 V AC control voltage
240 240 V AC control voltage
OVERVIEW
http://
1–5