Preset Counters And Timers - GE Multilin MM3 Motor Manager 3 Instruction Manual

S5 MONITORING
5.6.2 Preset
Counters and
Timers
] PRESET COUNTERS
] AND TIMERS
5–36
PATH: S5 MONITORING
These setpoints are used to set the indicated counters and timers to a predetermined
value.

PRESET COUNTERS AND TIMERS

PRESET RUNNING
HOURS: 0 HRS
PRESET STOPPED
HOURS: 0 HRS
PRESET NUMBER OF
STARTS: X100
PRESET OVERLOAD
TRIPS: 0
PRESET THERMISTOR
TRIPS: 0
PRESET GROUND FAULT
TRIPS: 0
PRESET SINGLE PHASE
TRIPS: 0
PRESET ACCELERATION
TRIPS: 0
PRESET UNDERCURRENT
TRIPS: 0
PRESET UNDERPOWER
TRIPS: 0
PRESET STALLED ROTOR
TRIPS: 0
PRESET CONTROL
TRIPS: 0
PRESET INTERLOCK
COUNTER: 0
MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
CHAPTER 5: SETPOINTS
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1