Working With Setpoints And Setpoint Files; Engaging A Device; Entering Setpoints - GE Multilin 750 Quick Reference Manual

Working with setpoints and setpoint files

The Front Panel settings can now be edited, printed, or changed according to user
specifications. Other setpoint and commands windows can be displayed and edited in a
similar manner. Actual values windows are also available for display. These windows can be
locked, arranged, and resized at will.
Refer to the EnerVista 750/760 Setup Help File for additional information about
the using the software.
NOTE
WORKING WITH SETPOINTS AND SETPOINT FILES

Engaging a device

The EnerVista 750/760 Setup software may be used in on-line mode (relay connected) to
directly communicate with a 750/760 relay. Communicating relays are organized and
grouped by communication interfaces and into sites. Sites may contain any number of
relays selected from the SR or UR product series.

Entering setpoints

The System Setup page will be used as an example to illustrate the entering of setpoints. In
this example, we will be changing the current sensing setpoints.
1. Establish communications with the relay.
2. Select the Setpoint > System Setup menu item. This can be selected from the device
setpoint tree or the main window menu bar.
3. Select the PHASE CT PRIMARY
This will display three arrows: two to increment/decrement the value and another to
launch the numerical calculator.
18
setpoint by clicking anywhere in the parameter box.
750/760 Quick Reference Guide