Avg Mode - Racelogic VBOX Touch User Manual

You can adjust the number of decimal places displayed for speed values across all Speed displays, between 0, 1
(default) and 2 decimal places. Tap the button to cycle through the options.
Speed Display Smoothing
If required, live speed values displayed can be smoothed. Available options include 0.0 s, 0.25 s (default), 0.5 s and 1.0
s and refer to the amount of time that the displayed data is averaged by. Tap the buttons to change the smoothing
levels.
IMPORTANT - This option will smooth live speed displays within all relevant screen modes.
Notes:
• Smoothing only applies to the screen displays, not recorded data.
• It introduces a slight delay to the displayed value.
V Avg Mode
It is possible to change whether the average speed on the
Moving.
• Continuous: Average speed will start to calculate as soon as an SD card is inserted and initialised.
• Moving: Average speed will start to calculate as soon as a speed over 0.8 km/h is detected. calculations will stop
when speed is less than 0.8 km/h.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/04_-
Average Speed Screen
_VBOX_Touch_Display_Modes/VBOX_Touch_-_Speed_Display_Mode
is calculated as Continuous or
77