Avg Mode; Distance Display - Racelogic Motorsport VBOX Touch V2 User Manual

Hide thumbs Also See for Motorsport VBOX Touch V2:

Table of Contents

If required, the live speed values displayed can be smoothed. Your options are 0.0 s, 0.25 s (default), 0.5 s and 1.0

s. These time values refer to the amount of time that the displayed data is averaged by. Tap the buttons to change

the smoothing levels.

IMPORTANT

This option will smooth live speed displays in all relevant screen modes.

Notes:

• Smoothing only applies to the screen displays, not the recorded data.

• Smoothing introduces a slight delay to the displayed value.

V Avg Mode

You can change whether the average speed on the Average Speed Screen is calculated as Continuous or Moving.

• Continuous: Average speed will start to calculate as soon as an SD card is inserted and initialised.

• Moving: Average speed will start to calculate as soon as VBOX Touch detects a speed over 0.8 km/h.

Calculations will stop when the speed is under 0.8 km/h.

This setting lets you change the unit used for the distance travelled when you are using the Average/

Distance screen. The Distance Display setting will toggle between Feet/Miles (if the Distance unit is set to feet in the

General Settings) or will toggle between Metres/Kilometres (if the Distance unit is set to metres in the General

Settings)

%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_-

https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/

_VBOX_Touch_(v2%2F%2Fv3)

Table of Contents

Vbox touch v2 Vbox touch v3