Racelogic VBOX Touch User Manual page 56

Lap Timing - Basic Screen
This lap timing screen displays a lap time in relation to a set
Standing Start and Separate Finish
• Lap time: This will show either a live rolling lap time, or a static previous lap time, dependent on the
Time settings. If a rolling lap time is being displayed, the previous lap time will be displayed for 5 seconds when
a new lap starts before reverting to displaying the current live lap time. If the start/finish line has yet to be crossed,
the circuit name/layout will be displayed with a distance countdown to the start/finish line if the unit has a satellite
lock. If Standing Start
line been detected/defined, a 'No start line' warning will display.
• Time difference to best lap: This is the time difference between the last completed lap time and the quickest lap
time and is displayed dependent on the
time is being displayed, or will appear for 5 seconds after a lap has been completed if a rolling lap time is being
shown. If the start/finish line has yet to be crossed or a lap hasn't been completed, it will not be shown.
Line, and a Reference
has been enabled, a 'Standing Start Mode Enabled' message is displayed. If no start/finish
Rolling Lap Time
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/04_-
Start/Finish Line, Separate Start and Finish Lines
Lap.
settings. It will either display continuously if a static lap
_VBOX_Touch_Display_Modes/VBOX_Touch_-_Lap_Timing_Mode
or a
Rolling Lap
56