Speed Display Smoothing; V Avg Mode - Racelogic VBOX Touch Manual

Speed display mode

Hide thumbs Also See for VBOX Touch:

Table of Contents

You can adjust the number of decimal places displayed for speed values across all Speed displays, between 0, 1

(default) and 2 decimal places. Tap the button to cycle through the options.

Speed Display Smoothing

If required, live speed values displayed can be smoothed. Available options include 0.0 s, 0.25 s (default), 0.5 s and 1.0

s and refer to the amount of time that the displayed data is averaged by. Tap the buttons to change the smoothing

levels.

IMPORTANT

- This option will smooth live speed displays within all relevant screen modes.

Notes:

• Smoothing only applies to the screen displays, not recorded data.

• It introduces a slight delay to the displayed value.

It is possible to change whether the average speed on the

Moving.

• Continuous: Average speed will start to calculate as soon as an SD card is inserted and initialised.

• Moving: Average speed will start to calculate as soon as a speed over 0.8 km/h is detected. calculations will stop

when speed is less than 0.8 km/h.

https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/Firmware_Updates_%E2%80%93_VBOX_Touch/

VBOX_Touch_Firmware_Version_1.4/02_Display_Modes_%E2%80%93_VBOX_Touch_Firmware_v1.4/VBOX_Touch_-

Average Speed Screen

is calculated as Continuous or

_Speed_Display_Mode

Table of Contents

Do you have a question about the VBOX Touch and is the answer not in the manual?