Racelogic VBOX Touch User Manual page 85

• Daylight Saving: When 'Enabled', this setting will add +1:00 hr on to the local time setting. 'Disabled' by default.
Note: The setting cannot be changed if the unit is moving or logging, if you try and change the setting, a warning
message will appear.
• Leap Seconds: The leap second value is set as '18 s' by default and can be changed if required using the keypad
presented when the current value button is pressed. This was increased to 18 seconds as of December 2016 -
more information on this is available
Note: The setting cannot be changed if the unit is moving or logging, if you try and change the setting a warning
message will appear.
To save the value inputted, press the Confirm Button
on the bottom right of the screen, or press the Cancel Button
on the bottom left of the screen to return the Time Settings screen without saving.
Note: The maximum input value is 99.
UTC Offset Selector Example
here.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/05_-
>
>
_VBOX_Touch_Settings
85