B.8 CHANNEL SELECTION
The following two OIDs are needed to select channel assignments (A, B,
or C) for all boards or individual ports. These OIDs are needed for
products supporting multichannel connectivity.
fnbconnect
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
fnbPortConnectPortAssignment
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
EMME USER'S GUIDE
Denotes the connection status of the CSMA/
CD board to the inter-RIC bus.
1.3.6.1.4.1.52.1.6.1.2.2.1.1.2.slot
Integer
1 = Channel B
2 = Channel C
4 = Channel A
read-write
Provides the capability to change or query the
specific interface that the port is assigned.
1.3.6.1.4.1.52.1.6.1.2.3.1.1.3.slot.port
Integer
1 = Channel A
2 = Channel B
3 = Channel C
read-write
CHANNEL SELECTION
Page B-9