Management Terminal Configuration - Cabletron Systems EMME User Manual

CHAPTER 5: LOCAL MANAGEMENT
5.1

MANAGEMENT TERMINAL CONFIGURATION

To access Local Management, you need either a VT320 terminal or PC
running VT terminal emulation software.
The following instructions explain how to configure a terminal to
communicate with Local Management. Refer to the terminal's user guide
for more instructions if necessary. To access the set-up directory on a
VT320 terminal, press F3 (Table 5-1 lists the directory selections).
Table 5-1. VT320 Set-Up Directory Selections
Columns –>
Controls –>
Auto Wrap –>
Scroll –>
Text Cursor –>
Cursor Style –>
Mode –>
ID Number –>
Cursor Keys –>
Power Supply –>
Transmit –>
Receive –>
XOFF –>
Bits –>
Parity –>
Stop Bit –>
Local Echo –>
Port –>
Transmit –>
Auto Answerback –>
Keys –>
Auto Repeat –>
Keyclick –>
Margin Bell –>
Warning Bell –>
Page 5-2
Display Set-up
80 Columns
Interpret Controls
No Auto Wrap
Jump Scroll
Cursor
Underline Cursor Style
General Set-up
VT300, 7 Bit Controls
VT320ID
Normal Cursor Keys
UPS DEC Supplemental
Communication Set-up
Transmit=9600
Receive=Transmit
XOFF at 64
8 bits
No Parity
1 Stop Bit
No Local Echo
DEC-423, Data Leads Only
Limited Transmit
No Auto Answerback
Keyboard Set-Up
Typewriter Keys
any option
any option
Margin Bell
Warning Bell
EMME USER'S GUIDE