Cabletron Systems EMME User Manual page 114

Appendix B: EMME OIDs
rptrPortSecurityDisableOnViolation
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
rptrPortSecurityFullSecEnabled
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
Page B-4
Designates whether port is disabled if source
address is violated. A source address violation
occurs when a address is detected which is not
in the source address list for this port. If this
port is disabled for this port address violation it
can be enabled by setting
rptrPortMgmtAdminState. Default state is
enabled (2).
1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6
Integer
1 = disable
2 = enable
read-write
A port that is set to full security and is locked
will scramble all packets, which are not
contained in the expected source address list,
including broadcasts and multicasts. A port that
is set to partial security will allow broadcast and
multicasts to repeat unscrambled. Default state
disabled (1).
1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7
Integer
1 = disables
2 = enables
read-write
EMME USER'S GUIDE