Table of Contents
Advertisement
This section describes the environmental specifications and safety and
approval requirements for the SWPIM-DDS. Cabletron Systems reserves
the right to change these specifications at any time without notice.
A.1
PHYSICAL PROPERTIES
Dimensions:
Weight (Unit):
Nominal current draw on +5V
supply from host platform:
MTBF (Predicted):
A.2
NETWORK INTERFACE
The WAN connection can be seen in
The SWPIM-DDS uses an RJ48 connector for the network port that
supports the pin assignments in
according to USOC RJ48S.
SWPIM-DDS Installation Guide
APPENDIX A
SPECIFICATIONS
1.91 H x 5.40 W x 19.05 D (cm)
0.75 H x 2.125 W x 7.50 D (in)
.068 kg (0.15 lb)
165 mA
9,678,856 hours
Figure
1 2 3 4 5 6 7 8
Figure A-1 RJ48 Pinout
Table
A-1. The pinouts are designed
A-1.
strj45
A-1
Advertisement
Table of Contents
