Mib Navigator Command Set Overview; Conventions For Mib Navigator Commands - Cabletron Systems EMME User Manual

6.3

MIB NAVIGATOR COMMAND SET OVERVIEW

There are three categories of commands in the command set.
• Navigation Commands - Allow the user to access and manage the
MIB for the device running the MIB Navigator. Some of these
commands also provide user community-string information. The
commands are as follows:
– branch
– get
– pwd
– tree
• Built-In Commands - Allow the user to access and manage network
devices connected to the device running the MIB Navigator. The
commands are as follows:
– arp
– snmpbranch – snmpget
– traceroute
• Special Commands - Allow the user to exit from the MIB Navigator.
The commands are as follows:
– done

6.3.1 Conventions for MIB Navigator Commands

This manual uses the following conventions for denoting commands:
Information keyed by the user is shown in this helvetica font.
•
• Command arguments are indicated by two types of brackets:
- required arguments are enclosed by [ ].
- optional arguments are enclosed by < >.
EMME USER'S GUIDE
MIB NAVIGATOR COMMAND SET OVERVIEW
– cd
– ls
– set
– whoami
– defroute
– quit
– ctron
– mib2
– show
– netstat
– snmpset
– exit
– dir
– next
– su
– ping
– snmptree
Page 6-3