Appendix Bemme Oids; Spanning Tree Protocol - Cabletron Systems EMME User Manual

This appendix contains a selected number of OID strings that are most
frequently needed. The OIDs are implemented by using either the SNMP
Tools procedures detailed in Chapter 5 or the MIB Navigator procedures
located in Chapter 6. Note that the OIDs can be accessed using
LANVIEW, SPECTRUM, SPMA, or other SNMP compliant programs.
B.1 SPANNING TREE PROTOCOL
The following OID is used to select the desired Spanning Tree Protocol.
ctBridgeStpProtocolSpecification
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
EMME USER'S GUIDE
APPENDIX B
EMME OIDS
This object allows the network manager to
select which Spanning Tree Protocol will be
operational on the bridge. The value decLb100'
(2) indicates the DEC LANBridge 100
Spanning Tree Protocol. The value ieee8021d'
(3) indicates the IEEE 802.1d Spanning Tree
Protocol. The value 'none' (1) indicates no
Spanning Tree Protocol is operational.
1.3.6.1.4.1.52.4.1.2.3.2.1
Integer
1 = None
2 = decLb100
3 = ieee802 1
read-write
Page B-1