Chapter 3 Installing The Emme; Unpacking The Emme - Cabletron Systems EMME User Manual

This chapter contains unpacking information and installation instructions
for the Cabletron Systems EMME into a Cabletron Systems
MMAC-FNB. Additional instructions are provided on setting the mode
switches and for connecting segments to the EMME.
3.1

UNPACKING THE EMME

The contents of the EMME shipment is dependent on whether or not the
EMME was ordered with the Routing software. Table 3-1 lists the items
shipped without the Routing option.
Part Number
9372065
2190183
9990050
9030514
9030834
9030746
Unpack the EMME as follows:
1. Remove the shipping material covering the EMME in the shipping
box.
2. Carefully remove the module from the shipping box. Leave the
module in its conductive bag until you are ready to install it. Save the
shipping box and materials in the event the unit has to be reshipped.
3. Visually inspect the module. If there are any signs of damage, contact
Cabletron Systems Technical Support immediately.
EMME USER'S GUIDE
CHAPTER 3
INSTALLING THE EMME
Table 3-1. Items Delivered With EMME
Cable, RJ-45 to RJ-45
Download program
Disposable wrist strap
EMME User's Guide
Release Notes, EMME Boot
Release Notes, EMME
Description Quantity
1 each
1 each
1 each
1 each
1 each
1 each
Page 3-1