Ethernet Management Module Overview - Cabletron Systems EMME User Manual

Ethernet management module with ethernet
Table of Contents

Advertisement

CHAPTER 1: INTRODUCTION
Chapter 6, MIB Navigator, describes MIB Navigator's management and
control. The MIB Navigator manages EMME-related Management
Information Bases.
Chapter 7, Troubleshooting, details the Remote LANVIEW LEDs
incorporated into the EMME that enable you to quickly diagnose
problems that may occur with the module. This chapter also includes a
troubleshooting checklist, procedures for using the reset button, and
instructions for calling Technical Support if you need assistance.
Appendix A, Image File Download Using OIDs, provides instructions
for downloading an image file to the EMME by setting the MIB OID
strings.
Appendix B, EMME OIDs, contains selected OID strings which are
most often used.
Appendix C, EMME Specifications, contains location requirements and
operating specifications for the EMME.
1.2

ETHERNET MANAGEMENT MODULE OVERVIEW

The Cabletron Systems Ethernet Management Module with Ethernet
(EMME) is the heart of the Cabletron Systems Multi Media Access
Center. The EMME can provide four bridged and managed channels and
management for three separate Ethernet channels within a single MMAC.
This is accomplished by having channel A operate over the Power and
Management Bus, Cabletron's original Ethernet channel. Channels B and
C operate over the Flexible Network Bus (FNB). The EMME can also
bridge all three channels to a fourth externally connected channel (D,
usually a backbone connection), using one of the AUI ports on the
faceplate of the module.
The Cabletron Systems Ethernet non-repeater Media Interface Modules
use channel A on the MMAC backplane to communicate with the EMME
which performs the repeating function. MIMs provide a variety of
different media connections at one point within an MMAC. The EMME
incorporates an IEEE 802.3 repeater to provide repeater functionality for
these MIMs.
The EMME is fully compliant with IEEE 802.3 standards and provides
support for Spanning Tree IEEE 802.1d and DECnet.
Page 1-2
EMME USER'S GUIDE

Advertisement

Table of Contents
loading

Table of Contents