Enabling Ports; Disabling Ports - Cabletron Systems EMME User Manual

CHAPTER 5: LOCAL MANAGEMENT

5.13.4 Enabling Ports

The Enable Port command lets you enable the port selected in the Port
command. You must first use the Port command to select the desired port.
To set the Port Enable command, perform the following steps:
1. Use the arrow keys to highlight the ENABLE PORT command at the
bottom of the screen.
2. Press ENTER.

5.13.5 Disabling Ports

The Disable Port command lets you Disable the port selected in the Port
command. You must first use the Port command to select the desired port.
To set the Port Disable command, perform the following steps:
1. Use the arrow keys to highlight the DISABLE PORT command at the
bottom of the screen.
2. Press ENTER.
Page 5-30 EMME USER'S GUIDE