Cabletron Systems EMME User Manual page 12

The EMME operates in conjunction with Cabletron Systems' Repeater
Interface Controller (RIC) Media Interface Modules (MIMs) by using the
MMAC's FNB Ethernet channels B and C.
The EMME is SNMP compliant and can be controlled and monitored by
numerous SNMP Network Management packages both remotely and
locally. EMME firmware also supports Distributed LAN Monitor (DLM)
and Full Remote Monitoring (RMON) groups including: Alarms, Events,
History, Hosts, Hosts Top N, Statistics, Matrix, Captive and Filter.
The EMME also provides the following:
• i960 RISC based processor
• Four bridged/routed Ethernet networks
• IEEE 802.1 D Spanning Tree and DEC Spanning Tree support
• IEEE 802.3 compliance
• Flash download capability for easy firmware downloads
• Standard FTP download capability
• LANVIEW diagnostic LEDs
• Special Filtering Data Base
• Complete SNMP management capability
• IETF MIB support including bridge, RMON, and MIBII
• Complete packet and error breakdown for all four channels
• Cabletron Systems' Distributed LAN Monitoring (DLM) reducing
management traffic between network devices and management
platform
• Cabletron Systems' cable redundancy
EMME USER'S GUIDE
ETHERNET MANAGEMENT MODULE OVERVIEW
Page 1-3