Uninterruptible Power Supplies (Ups); Emme Upgrades - Cabletron Systems EMME User Manual

CHAPTER 1: INTRODUCTION
For example, you can gather a large amount of statistical information
about the EMME, including the quantities of the following.
– Packets
– Transmit Collisions
– Runt Packets
– CRC Error
– Bytes Received
For further specific information, refer to the applicable Network
Management Package User's Manual.

1.13 UNINTERRUPTIBLE POWER SUPPLIES (UPS)

The EMME can monitor and control American Power Conversion UPSs.
The EMME modem port is connected to the UPS via a DB9-to-RJ45
adapter (Cabletron Part Number 9372066).
This feature supports two methods for activating the UPS monitoring as
follows:
• Using the Local Management, System Level screen of the EMME via
a system connected to the EMME console port.
• Using SPECTRUM Element Manager for Windows, SPECTRUM
Portable Management Application (SPMA), or SPECTRUM. These
software packages provide Graphical User Interfaces (GUI) to
configure the UPS.

1.14 EMME UPGRADES

To take advantage of enhanced EMME features, a Dynamic Random
Access Memory (DRAM) upgrade is required. These are DRAM modules
that are only available through Cabletron Systems. The DRAM modules
provide additional memory required to support the following:
– Routing
– RMON MIB Host
– Hosts Top N
Page 1-20
– Receive Collisions
– Giant Packets
– Misaligned Packets
– Out of Window Collisions
– Matrix
– Captive
– Filter Groups
EMME USER'S GUIDE