Wan Physical Configuration Screen Fields - Cabletron Systems CyberSWITCH CSX200 User Manual

WAN Physical Configuration Screen Fields
The following list describes the WAN Physical Configuration screen fields.
Displays configuration information for the WPIMs that are installed.
WPIM # —
Displays the WPIM type.
Type —
Displays the BRIM slot in which the WPIM resides.
BRIM # —
Mode — Displays the WPIM mode.
Active — Displays the status of the WPIM.
Displays the interfaces available to each WPIM.
Ifaces —
WPIM-HDSL Configuration Fields
HDSL Tx Clock Source —
field toggle between Loop-Timing (Extracted Line Data) and Local-Timing (Internal Clock). The
default setting for this field is Loop-Timing.
The Loop-Timing selection in this Local Management screen corresponds to the Slave
NOTE
selection in the QuickSET HDSL WAN Configuration window; the Local-Timing
selection corresponds to the Master selection.
HDSL Timeslot Configuration —
selections for this field toggle between Full and Fractional. The default setting for this field is Full.
Full uses all 24 timeslots and Fractional uses the first 12 timeslots.
Displays the HDSL Transmit Clock Source. The selections for this
Displays the timeslot configuration for the WPIM. The
WAN Configuration Using Local Management
CSX200 Family User's Guide 169