Hdsl Physical Configuration - Cabletron Systems CyberSWITCH CSX200 User Manual

WAN Configuration Using Local Management
HDSL Physical Configuration
To configure the WPIM-HDSL for the CSX200, access the WAN Physical Configuration screen
for the WPIM-HDSL, shown in
menu item on Setup Menu screen (refer to
Configuration screen displays.
Local Management
SAVE
168 CSX200 Family User's Guide
Figure 78, by using the arrow keys to highlight the WAN SETUP
WPIM 1
Type: HDSL
Type: T1
BRIM #: 1
Mode: [Primary]
Active: Yes
Active: Yes
Ifaces: 003-026
WPIM 1 Line Configuration
HDSL Tx Clock Source:
HDSL Timeslot Configuration:
[WPIM 1]
Figure 78 WAN Physical Configuration Screen
Chapter 6), and pressing ENTER. The WAN Physical
WAN PHYSICAL CONFIGURATION
WPIM 2
BRIM #: 2
Mode: [Primary]
Ifaces: 027
[Loop-Timing]
[Fractional]
WAN INT CONFIG
Flash Image Version XX.XX.XX
RETURN