Cabletron Systems CyberSWITCH CSX200 User Manual page 16

Introduction
Chapter 3, 10BASE-T LAN
Ethernet Local Area Network (LAN).
Chapter 4, Installation, provides detailed installation instructions for attaching the CSX200 to a
network.
Chapter 5, CSX200 Configuration with
CSX200 to a Wide Area Network (WAN) using Cabletron Systems QuickSET management utility.
Chapter 6, General Configuration Using Local
configuring the CSX200 through a TELNET connection.
Chapter 7, WAN Configuration Using Local
connecting the CSX200 to a Wide Area Network (WAN) using Local Management through a
Telnet connection.
Chapter 8, MIB Navigator, explains how to use the MIB Navigator utility.
Chapter 9, Troubleshooting, provides detailed troubleshooting tips using the LANVIEW LEDs
on the CSX200.
Appendix A, WPIM Cable Specifications,
WPIMs.
Appendix B, Specifications and Standards Compliance,
safety and compliance standards for the CSX200.
Chapter C, FCC Part 68 - User's Information for
comply with FCC Rules, Part 68.
Appendix D, Glossary,
2 CSX200 Family User's Guide
Requirements, describes the basic cabling requirements for an
QuickSET, provides instructions on connecting the
provides part number and connector information for
defines commonly used terms.
Management, provides instructions for
Management, provides instructions for
contains hardware specifications and
CSX200, provides instructions required to