Cabletron Systems CyberSWITCH CSX200 User Manual page 114

General Configuration Using Local Management
Bridge Setup — The Bridge Setup screen allows you to select a Spanning Tree protocol and
enable/disable switch ports.
Router Setup — The Router Setup screen accesses two other screens that provide general IP
configuration and allow you to enable or disable the RIP (Routing Information Protocol) feature.
WAN Setup – The WAN Setup menu item accesses two other screens that provide WAN physical
configuration and WAN Interface configuration access to enable a WAN link to be set up. Refer to
Chapter 7 for information on how to configure the CSX200 and the CSX200 family of products
for the WPIM-T1, WPIM-SY, WPIM-DDS, and WPIM-HDSL through Local Management.
Information for configuring the WPIM-DI and WPIM-E1 through Local Management is
NOTE
not included in
Management guides.
100 CSX200 Family User's Guide
Chapter 7, but is available through their respective WPIM Local