Attaching/Detaching 3-Pt Hitch Seeder - Landoll Brillion SL10 Operator's Manual

OPERATION
Attaching/Detaching 3-PT Hitch
Seeder

To prevent the machine from tipping backward
on the frame, disengage parking pin only when
the seeder is fully attached to the tractor. Be sure
to observe the following sequences.
Figure 3-2: Parking Pin
Hooking Up the Seeder:
1. Attach Seeder to the Tractor.
2. Raise Seeder. Remove the Klik Pin, pull the Parking
Pin into the outer position, replace the Klik Pin. See
Figures 3-2 and 3-3.
Unhooking the Seeder:
1. With Seeder raised, remove the Klik Pin, push in the
Parking Pin, replace the KIik Pin. See Figures 3-2
and 3-4.
2. Disconnect the Tractor from Seeder, lower Seeder.
3-4
WARNING
Klik Pin
Parking
Pin
Klik Pin
Disengaged
Parking Pin
Figure 3-3: Parking Pin Disengaged
Klik Pin
Parking Pin
Figure 3-4: Parking Pin Engaged
Engaged
1P342-0621