Pull Type Seeder Assembly - Landoll Brillion SL10 Operator's Manual

ASSEMBLY

Pull Type Seeder Assembly

1. Untie the two rolled up Drawbar Hydraulic Hoses
near the center of the Frame Tube. Ensure the hoses
are not interfering with where the Drawbar is to be
attached.
2. Center Drawbar in relationship with the Seed Box
Center Bracket. Attach
Tube with 5/8-11 U-Bolts, Lock Washers and Nuts.
See Figure 2-6.
3. Attach the Hose Holder to the Drawbar with 5/8-11 x
1-1/2 Bolt, Lock Washer and Nut.
Hose Holder
Drawbar
2-4
Drawbar to Seeder Frame
Nut,5/8-11
Lock Washer,5/8
Bolt,5/8-11 x 1-1/2
Lock Washer,5/8
Nut,5/8-11
Figure 2-6: Drawbar Installation
4. Install Manual Holder to Drawbar with Hose Clamps.
5. 8FT Seeders: Install SMV Mount to Seed Box Frame
with 1/2-13 U-Bolt, Lock Washers and Nuts. See
Figure 2-1.
10FT Seeders: Install SMV Mount to Seed Box
Center Bracket with 1/2-13 x 1-1/2 Bolts and
Locknuts. See Figure 2-2.
6. Apply anti-seize to Spindles and insert a Hub and
Spindle Assemblies into each Wheel Arm. Secure
with 1/2-13 x 3 Bolts and Locknuts. See Figure 2-8.
Manual
Holder
Hose
Clamp
U-Bolt,5/8-1 1
1P342-0621
ART #