6.5 Setting of auto zero calibration
6.5.1 Auto zero calibration
Auto zero calibration is automatically carried
out at the time when zero calibration is set.
made are determined by setting of auto cali-
bration component in Section 6.2.4.
Before changing the setting of auto zero cali-
bration, set the ON/OFF to OFF.
key. Press the
screen that appears, point the cursor to
any item you want to set by pressing the
or
key. Press the
value entry or the setting. For the value
entry or setting change, use the
key. To change the setting, use the
key to move the cursor to the right.
After setting, press the
zero calibration is carried out by the en-
tered setting value.
Description of setting items
To close "setting of Auto Zero Calibration"
To close the "Setting of Auto Zero Calibration"
or cancel this mode midway, press the
A previous screen will return.
key to
MODE
or
key.
ENT
key.
ENT
or
key, and auto
ENT
key.
ESC
6 - 20
Measurement Mode
MODE
(
(
(
End of Auto Zero Calibration Setting
)
ENT
)
ENT
Press the
or
the
key, and
date and time are
displayed
alternately.
)
ENT