Deleting Own Proxy Card; Managers' Programming Menus - Teletek electronics ECLIPSE 8 User's Operation Manual

4.6 Deleting Own Proxy Card

To delete his/her own card, the user needs to do in sequence:
User Code
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Associated card
LED 32
Associated card
LED 8/LED 16A
Enter at the address 11 and choose a user number - the LED for zone 1 is blinking on the
display. The registered user card is indicated with digit buttons 1 to 9 lighting on in red.
Press and hold for 2-3 second the button "0".
Attention: No confirmation is necessary after deleting of a user card. You cannot reject
the operation with pressing the CANCEL button.

5. MANAGERS' PROGRAMMING MENUS

User 01 is always Chief Manager is the system. The default Chief Manager Code is 0000.
Important Notes: The Chief Manager's rights cannot be changed.
One Manager cannot change other Manager codes.
The Manager can change only regular User codes associated to common Area number(s)
with him.
To enter manager programming mode, enter in consecutive order:
Manager
code
ECLIPSE 8/16/32/99 Series – User Operation Manual
Text menu/
address
Press and hold
for 2-3 sec.
Press and hold
for 2-3 sec.
25
Press and hold
for 2-3 sec.
Card is deleted
Card is deleted
Text Menu/
2-digit address