Checking The Bypassed Zones; Users' Programming Menus - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/16/32/99 Series – User Operation Manual

3.8 Checking the Bypassed Zones

According the used keyboard, the indication for bypassed zones differs.
Keyboard Indication and checking the bypassed zone
The BYPASS LED is lit. In order to check the bypassed zones, you need to
press the ENTER button once. The numbers of the bypassed zones are lit,
LED 8/ while the BYPASS LED blinks.
LED 16A Note: The LED 8 keyboard has indication for bypassing 01 to 08, and LED
16A – for 01 to 16 zones. If there are bypassed zones out of their range
(Eclipse 32/99), they are not shown on the screen.
The BYPASS button is lit. In order to check the bypassed zones, you need
to press the BYPASS button once. The numbers of the bypassed zones
are lit, while the BYPASS button blinks.
LED 32
Note: The LED 32 keyboard has indication for bypassing 01 to 32 zones. If
there are bypassed zones out of its range (Eclipse 99), they are not shown
on the screen.
The BYPASS button is lit. In order to check the bypassed zones, you need
LCD 32/
to press the BYPASS button once. Information about the first bypassed
LCD 32
zone is shown on the display, while the other zones can be checked with
Sensitive
the arrow buttons, the BYPASS button blinks.

4. USERS' PROGRAMMING MENUS

There are no default codes for ordinary users in the system. The Manager in the system
can set new codes and allow certain users to have manager rights (for ECLIPSE 32/99).
To enter user programming mode, enter in consecutive order:
* Code without manager rights.
Quick table for Users' Programming Menu
Text Menus
1. User Code Change
2. View Log
3. Chime
4. Zone Bypass
5. User Card
Code*
Address Programming
Number
1 Changing own code
2 Memory LOG view
3 Chime Enable/Disable
4 Zone bypassing
5 Add/Delete own proxy card
Select a programming menu/
address number
parameter
20
ECLIPSE Control Panel
8 16 32
  
  
  
  
  
99




