Setting A Function For "" Or "A" Button Of Bravo Key Fob - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/16/32/99 Series – User Operation Manual
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Code numbers:
Enter consecutively
Source First Last
code numbers
The cloning process starts by entering the number of the code that will be cloned
("Source"). After that the number of the first code in the series of codes which will accept
the settings of the source is entered (First). In the end the last code in the series of codes
is entered (Last).
For example, if you want the settings of code 02 to be cloned to codes 03 to 10 you need
to enter: [02]> [03] [10].
If only one code is to accept the settings of the source, its number is entered both as
"First" and "Last" in the series.
LED 32
After entering address 13, digit 15 on the display blinks, while digit 16 is permanently lit –
the system indicates that it is expecting entering of "Source" code. After entering the first
digit of the code – digit 15 is lit permanently, while digit 16 blinks. The second digit of the
"Source" code is entered. The system now expects entering the "First" code, followed by
"Last" code. The indication is the same.
LED 8/LED 16A
After entering address 13, digit 1 on the display blinks, while digits 2, 3, 4, 5 and 6 are
lighting up permanently – the system indicates that it is expecting entering in sequence of
"Source" code, "First" code and "Last" code. The set value at the respective position is
indicated with lighting up in red digit button.
For example, if the settings for code 02 have to be cloned for codes from 03 to 10, we
should enter in sequence: 020310.
The cloning procedure is started with pressing the ENTER button.
5.15 Setting a function for "" or "A" button of BRAVO Key Fob
In menu "1. USERS – xx. User – 09. RC(A)Func." Or Address 21, the Manager can set
a function for operation of "" button of BRAVO RC; "A" button of BRAVO RC-41; the
button of BRAVO RC-11 remote key fob (Eclipse WL wireless expander should be added
to the system).
In text menus the user will see the functions as a list. To enable a function, press button
"1" – a symbol "" is assigned in front of the option. To disable a function, press button
"0". To scroll over the available options, use the arrow buttons. Only one function can be
set for operation.
In address menus the functions are corresponding to the numbers from the table below:
Address
User number Option
Manager code
35