Advertisement
Correct use
4.3 OPERATION OF THE SIDE UNDER-RUN PROTECTION DE-
VICES
SIDE UNDER-RUN PROTECTION
The design of the side under-run pro-
tection devices enables their locking in
the transport position and in the raised
position.
LIFTING
• Remove the cotter pin (2) securing
the under-run protection device.
• Raise the under-run protection device
to the appropriate height so that it can
be locked - position (B).
• Secure the under-run protection
device with cotter pins in the hole
marked with a black arrow in the
A
Figure 4.3
Under-run protection devices
(1) underrun protective strip, (2) cotter pin, (A) underrun protective device in transport position,
(B) underrun protective device in raised position, (C) hole for underrun protective device locking pin
DEVICES
LOWERING
• To lower the under-run protection
Side underrun protection devices must not be used
as supporting elements while climbing on the trailer.
Do NOT drive with raised under-run protection de-
vice. Before driving, make sure that underrun pro-
tection devices are lowered and locked in the lower
position.
Unless necessary, do not leave the underrun protec-
tion device in the raised position.
1
2
B
figure - position (C).
device, reverse the sequence.
Remember! The under-run pro-
tection device should be se-
cured in the lower position with
pins.
IMPORTANT
C
PRONAR T700M/1
Section 4
C
2
2
623-H.03-1
H.3.11.623.03.1.EN
4.5
Advertisement
