Advertisement
Section 5
5.5 DRAINING WATER FROM AIR TANK
PROCEDURE
• Press drain valve stem (1) located in
the lower part of tank (2).
The compressed air in the tank
causes the removal of water to
the exterior.
• Released valve stem should auto-
matically close and stop flow of air
from the tank.
• If the valve stem does not return to its
position, wait until the tank is empty.
Then, screw out and clean or replace
5.8
PRONAR T700M/1
Technical inspection schedule
Figure 5.3
Air tank
(1) drain valve
the valve.
1
2
589-I.01-1
(2) air tank
I.3.2.589.05.1.EN
Advertisement
