Advertisement
Introduction
CHECKING THE TRAILER AFTER DELIVERY
The manufacturer guarantees that the
trailer is fully operational and has been
checked according to quality control pro-
cedures and is ready for use. This does
not release the user from an obligation to
check the machine's condition after de-
livery and before the first use. The machine
is delivered to the user completely as-
sembled. Detailed information concerning
the machine hand-over are included in the
WARRANTY BOOK.
SCOPE OF INSPECTION ACTIVITIES
• Check completeness of the machine
according to order (standard and op-
tional equipment).
• Check the machine for missing parts
or damage resulting from wrong
transport of the machine to its desti-
nation (crushing, piercing, bending or
breaking of parts etc.).
• Check technical condition of covers
and protection devices.
• Check condition of paint coating;
check the machine for traces of
corrosion.
TIP
Hand-over of the trailer to the buyer involves a de-
tailed visual inspection and verification of the trailer
operation, as well as instructing the buyer on the ba-
sic usage rules. The trailer is operated for the first
time in the presence of the Seller.
• Check technical condition of tyres
and tyre pressure.
• Check if the nuts and bolts fixing the
wheels are properly tightened.
• Check technical condition of drawbar
eye and if correctly installed.
• Check technical condition of elastic
hydraulic lines.
• Check technical condition of pneu-
matic conduits.
• Check that there are no hydraulic oil
leaks.
• Check the electric lamps of the
machine.
• Check hydraulic cylinders for leaks of
hydraulic oil.
Discovered defects should be notified di-
rectly to the seller in order to remove them.
PRONAR T700M/1
U.11.2.EN
5
Advertisement
