Advertisement
Basic information
IMPORTANT
The front axle load of the tractor must be at least
20% of its own weight - this also applies to towing
the loaded trailer. If this condition is not met, the front
axle must be additionally loaded.
Table 1.3.
Requirements for second trailer
Maximum gross weight
Brake system connection sockets
Double line pneumatic system
Hydraulic system
Nominal pressure of the brake system
Double line pneumatic system
Hydraulic system
Hydraulic tipper system
Hydraulic oil
Maximum system pressure
Electrical system
Electrical system voltage
Connection socket
Trailer drawbar
Diameter of drawbar eye
(1) – use of other oil is permitted on condition that it may be mixed with the oil in the trailer. Detailed information
can be found on the product information card.
Contents
20%
Figure 1.3 Minimum tractor front axle load
JM
kg
-
according to ISO 1728
-
according to ISO 7241- 1
bar / kPa
bar / MPa
-
bar / MPa
V
-
mm
PRONAR T700M/1
Section 1
623-E.03-1
Requirements
24,000
6.5 / 650
150 / 15
L HL 32 Lotos
(1)
200 / 20
12
7-pole, ISO 1724
40 or 50
E.3.11.623.03.1.PL
1.7
Advertisement
