Advertisement
Section 4
4.11
UNLOADING
The trailer is equipped with a hydraulic
tipping system which, depending on the
direction of unloading the load box, may
be available in three versions:
• left tipping
• right tipping
• left and right tipping.
Tipping of the load box is controlled from
driver's cab using external tractor hydraulic
system manifold.
The trailer must be positioned to travel
forward and be hitched to the tractor. Un-
loading should only take place when the
A
2
Figure 4.10
Bolting of tipping pins
(1) tipping pin I (rear left or front right), (2) tipping pin II (rear right or front left), (3) securing pin,
(A) front socket, (B) rear socket
4.24
PRONAR T700M/1
DANGER
Ensure that during unloading nobody is in the vicinity
of the unloading zone.
trailer is placed on level and stable surface.
During work, ensure good visibility and
exercise due caution. Immobilise tractor
and trailer with parking brake. Remove all
load fastening devices immediately before
unloading. Unloading the trailer should be
carried out in accordance with the general
principles of workplace health and safety.
B
Correct use
1
3
623-H.07-1
Advertisement
