Advertisement
Safety advice
unauthorised persons do not have
access to the tractor cab.
• During maintenance or repair work,
the trailer may be unhitched from
tractor, but it must be secured with
chocks and parking brake.
• Should it be necessary to change
individual parts, use only those
parts indicated by the Manufacturer.
Non-adherence to these require-
ments may put the user and other
people's health and life at risk, and
also damage the machine and inval-
idate the guarantee.
• Before welding or electrical work, the
trailer should be disconnected from
the power supply. The paint coating
should be cleaned. Burning paint
fumes are poisonous for people and
animals. Welding work should be
carried out in a well lit and well venti-
lated space.
• During welding work, pay attention
to flammable or fusible elements
(parts of the pneumatic, electric and
hydraulic systems, plastic parts).
If there is a risk that they will catch
fire or be damaged, they should be
removed or covered with non-flam-
mable material before commencing
welding work. Before beginning work,
prepare a CO
or foam extinguisher.
2
• In the event of work requiring the
trailer to be raised, use properly cer-
tified hydraulic or mechanical lifts
for this purpose. After lifting the ma-
chine, stable and durable supports
must also be used. Work must not be
carried out under a trailer, which has
only been raised with a lift or jack.
• The trailer must not be supported
using fragile elements (bricks or con-
crete blocks).
• After completing work associated
with lubrication, remove excess oil
or grease. The trailer should be kept
clean and tidy.
• The user must not repair by himself
the components of the hydraulic or
pneumatic system i.e. control valves,
cylinders and regulators. In the event
of damage to these elements, repair
should be entrusted to an authorised
service point or elements should be
replaced with new ones.
• Do NOT install additional appliances
or fittings not according to the specifi-
cations defined by the Manufacturer.
• The trailer may only be towed when
axles and wheels, lighting system
and brakes are reliable.
PRONAR T700M/1
Section 2
F.3.11.623.04.1.EN
2.7
Advertisement
