Advertisement
Section 4
tailgate forks are locked in the
load box hooks.
• make sure that the hydraulic tailgate
or side wall is properly locked before
driving off.
• remove remains of load from the
trailer.
During unloading through side walls, load
box must be raised slowly and smoothly.
Raising the load box quickly will exert large
pressure on the upper part of the load box
due to displacement of the carried material
and could compromise trailer stability.
4.26
PRONAR T700M/1
IMPORTANT
Unloading of trailer may only take place when the
machine is positioned on level and hard surface
and connected to tractor. Tractor and trailer must be
placed to drive forward.
Only original tipping pins should be used. The use of
third-party pins may damage the trailer. Tipping pins
must be correctly interlocked.
The length of the cable controlling the valve limiting
the tilt angle of the load box is set by the Manufactur-
er and the User must NOT adjust it.
Do NOT jerk the trailer forward if load is bulky or re-
luctant to pour and does not unload.
Ensure that during unloading nobody is near tipped
load box or load material pouring out.
Do NOT tip load box in strong gusty winds condi-
tions.
Do NOT move off or drive when load box is raised.
During work, keep a safe distance from overhead
electric power lines.
Correct use
H.3.11.623.11.1.EN
Advertisement
