Advertisement
Technical inspection schedule
5.10 CLEANING THE AIR FILTERS
Air filter elements are installed on the con-
nection lines of the pneumatic system.
Filter elements are reusable and are not
subject to change unless they are me-
chanically damaged.
PROCEDURE
• Reduce pressure in supply line.
Pressure in line can be reduced
by pressing the head of the
pneumatic connection until re-
sistance is felt.
• Slide out the filter slide gate (1).
• Hold the filter cover (2).
• Hold the filter cover (2) with the other
hand. After removing slide lock, the
cover is pushed out by the spring
1
Figure 5.8
Air filter
(1) filter slide gate
located in the filter housing.
• The filter element and the filter body
should be carefully cleaned and
blown through with compressed air.
Assembly should be done in reverse
order.
PRONAR T700M/1
Section 5
2
526-I.08-1
(2) cover
I.3.2.589.09.1.EN
5.13
Advertisement
