Advertisement
Section 6
other brake cylinder on the same
axle.
• Engage the brake.
• Remove previous marks and measure
the brake cylinder piston rod stroke
again.
• If the brake cylinder piston rod stroke
is outside the proper operating range,
repeat the adjustment.
6.10
PRONAR T700M/1
CHECKING THE BRAKE OPERATION
• After completed adjustment, perform
a trial run.
• Engage the brake several times. Stop
the tractor with trailer and check the
temperature of brake drums.
• If any of the drums is too hot, correct
the brake adjustment and perform
a trial run again.
Maintenance
J.3.2.589.04.1.EN
Advertisement
