Advertisement
Section 1
1.7 ENVIRONMENTAL RISK
A hydraulic oil leak constitutes a direct
threat to the natural environment owing to
its limited biodegradability. Maintenance
and repair work which involves the risk
of an oil leak should be performed in the
rooms with oil resistant surface. In the
event of oil leaking into the environment,
first of all contain the source of the leak,
and then collect the leaked oil using
available means. Remaining oil should be
collected using sorbents, or by mixing the
oil with sand, sawdust or other absorbent
materials. The oil contaminations, once
gathered up, should be kept in a sealed,
marked, hydrocarbon resistant container,
and then passed on to the appropriate
oil waste recycling centre. The container
should be kept away from heat sources,
flammable materials and food.
Oil which has been used up or is un-
suitable for further use owing to loss of its
properties should be stored in its original
PRONAR T700M/1
1.14
IMPORTANT
Waste oil should only be taken to the appropriate fa-
cility dealing with the re-use of this type of waste. Do
NOT dispose of or pour oil into sewerage drains or
water reservoirs.
DANGER
Do not store oil waste in containers for food.
Used oil should be stored in containers resistant to
action of hydrocarbons.
TIP
The hydraulic system of the trailer is filled with
L-HL32 Lotos hydraulic oil.
packaging in the conditions described
above. Waste code: 13 01 10 (hydraulic
oil). Detailed information on hydraulic oils
can be found in the Material Safety Data
Sheets.
Basic information
E.3.4.622.08.1.PL
Advertisement
