Advertisement
Correct use
DANGER
During the adjustment, take special care due to
the significant weight of the drawbar and the risk of
crushing limbs.
• using the telescopic support (2)
crank, set the position of the drawbar
in relation to the lower frame. Set the
drawbar height in such a manner as
to align the openings in the spring
guide (4) with the openings in the
IMPORTANT
The tension of drawbar springs is selected and set
by the Manufacturer and must not be changed.
spring fixing sleeve (5). The trailer
design makes it possible to set the
drawbar in 5 different heights.
• When the drawbar height is set, in-
stall the pins (3) and tighten the bolts
(8) using the tightening torque spec-
ified in Table 5.7.
PRONAR T700M/1
Section 4
H.3.11.623.01.1.EN
4.3
Advertisement
