Stacker Roller Adjustment; Changing Stacker Roller Height; Adjusting Stacker Roller Position - Formax FD 3302 Operator's Manual

Chapter Advanced Operation
3
6.

Stacker Roller Adjustment

6-1.

Changing stacker roller height

Some thick and stiff paper may not be ejected smoothly because the paper may open after folding.
Change the stacker roller height and widen the space for the paper to pass in ejection.
Remove the auxiliary paper ejection guide.
7
2
Lift the stacker roller and hold it with hand to move to the [a] position shown in the
figure.
' After completing folding operations, be sure to return the stacker roller to the standard
•
position. Leaving it in the raised state will result in poor alignment of ejected paper.
6-2.

Adjusting stacker roller position

The position of the stacker roller is set
automatically to match the paper size and
folding mode. However, change the position
if thick paper or paper processed in cross fold
tends to unfold, stack unevenly, or jam on
ejection.
' Do not move the stacker roller forcibly
•
back or forth by hand. The machine may be
broken by doing so.
62
r