Operation Procedure - Formax FD 332 Operator's Manual

Set the paper guide for the appropriate paper size.
Neatly stack the paper on the feed table with its
printed side facing up. (its printed side down in case of fold-out)
Lower the paper feed table lever to set the paper.
Note:
If the paper does not come in contact with the paper feed roller, remove and reinsert.
Curled or wrinkled paper, may cause trouble. Correct it before use.
In case of printed paper, use it only after the ink is dry, otherwise the paper feed rubber
roller, paper separator, fold roller, and other parts of the unit will be stained with ink,
causing trouble.
Setting the paper discharge roller:
The discharge roller should be moved to the proper position
that suits the paper size.
Note:
Refer to the "Roller position indication" label. If ejection
is not performed properly, set to a different position.
Example:
Set the roller to position one when using 8 ½" x 11" paper.
Roller position indication label

(6)Operation Procedure

10