Community Strings - Cabletron Systems 5000, 5500 Manual

Device Application View

Community Strings

Table 5-2. BRouter Ports Table Field DeÞnitions
Module
Port
Route Group
IP Addr
Net Mask
Broadcast
Bridge Group
Community Strings
This view lists the community strings and allows you to change the access
levels. When an SNMP message is received by the Catalyst Switch, the
messageÕs community string is compared with this table to determine the
access rights of the messageÕs sender.
To access this view, do the following:
1. Within the Application view, highlight the CATStackApp icon (icon mode)
2. From the Icon Subviews menu, select Community Strings.
Application View
5-8
Column
Heading
The unique integer identiÞer of the module where
this port is located. This number is the same as the
slot number in which the module is installed.
The unique integer identiÞer of this port within its
module. This value is determined by the location of
the port on the module.
The IP route group to which this port belongs.
The IP address of this port.
The subnet mask of this port.
The broadcast address of this port.
The bridge group to which this port belongs.
or model type name (list mode).
DeÞnition
Cisco Catalyst 5000/5500 Hub
Management Module Guide